Home
About Us
Company Introduction
Core Team
Factory silhouette
Hardware devices
Exquisite workmanship
Quality Control
R&D investment
Team building
Product Center
Wet magnetic separator
Dry magnetic separator
Flat magnetic separator
Other products
Engineering Cases
Blog
Company News
Industry News
Quality service
Worry-free after-sales service
Fine selection of materials
Experiment and Design
Contact Us
Product
News
Used for sweeping and selecting strongly magnetic materials with a particle size of 0.5mm or less, especially suitable for selecting minerals with a particle size of -0.15mm, or removing mixed strongly magnetic minerals from fine-grained non-magnetic minerals.
Keywords: Wet magnetic separatortheofmagneticsize
For roughing and sweeping operations of strongly magnetic materials with a granularity of 0.6-3mm, and primary deironing of quartz sand.
Keywords: Wet magnetic separatorofmagneticandthe
It can be widely used to process ores with coarser particle size or lower magnetization coefficient, or to recover magnetic heavy media.
Keywords: Wet magnetic separatormagnetictheofseparator
The flat-plate high-intensity wet magnetic separator is a new type of magnetic separation equipment carefully developed by our company, which summarizes the advantages and disadvantages of traditional magnetic separation equipment and breaks through conventional design concepts. It integrates magnetic separation and gravity separation. It is suitable for the separation of quartz sand, limonite, ilmenite, manganese ore, garnet, and silicon carbide with a particle size of less than 5mm, and for iron removal in silicon micropowder.
Keywords: Flat magnetic separatormagneticandseparationofhigh-intensityseparatorequipment
The wet high-intensity magnetic separator is a newly developed permanent magnetic separator, mainly used for the tailings or selection and purification of weakly magnetic minerals (limonite, manganese ore, tungsten, niobium, tantalum, etc.) with a particle size of less than 12mm.
Keywords: Wet magnetic separatormagneticandtheof
This series of high-intensity magnetic separators utilizes the principle of the interaction between magnetic and mechanical forces, integrating magnetic separation and dewatering concentration into one machine. It is a newly developed magnetic separator specifically designed for adjusting the concentration of magnetic minerals in the upper and lower operating sections of magnetic separation plants.
Keywords: Wet magnetic separatormagneticprincipleseparationnewly
Double-layer dry magnetic separators are suitable for magnetic separation of materials such as magnetite, pyrrhotite, roasted ore, and ilmenite with a particle size of less than 3mm. They are also used for iron removal in coal, non-metallic minerals, and building materials. The magnetic system uses high-quality ferrite materials or a composite of ferrite and rare earth magnets, resulting in a high average magnetic induction intensity on the drum surface.
Keywords: Dry magnetic separatormagneticandmagnetsferrite
Mainly used for the primary or secondary crushing of mine ore, followed by the disposal of tailings and sand, as well as purification; purification of low-grade ores; steel slag recovery and iron removal.
Keywords: Dry magnetic separatormagneticpre-selectionpurification
This series of magnetic separators generally has a magnetic package angle of 160-175 degrees (special cases are 180-200 degrees), a high magnetic field, and a high-gradient magnetic field distribution. It can be used to separate river sand, sea sand, iron ore, and sand and soil ore, and can also be used for dry selection of fine powder materials, tailings, and lean ores. The recovery rate is high, reaching over 98%, and the speed is adjustable, allowing for rapid improvement of the ore grade.
Keywords: Dry magnetic separatormagneticraterecoverydegreesseparate
This product is designed to demagnetize pulp after magnetic separation and before grading and fine screening operations. This breaks down magnetic agglomerates between magnetic mineral particles, eliminating the impact on screening and thus improving ore dressing efficiency and concentrate grade.
Keywords: Other productsmagneticdemagnetizationdemagnetizing
The FX series self-dumping permanent magnetic separator consists of high-performance permanent magnetic cores, scrap iron belts, reduction motors, frames, rollers, etc., and is used with various conveyors for iron removal in various industries. It can achieve continuous iron removal.
Keywords: Other productsmagneticself-dischargingseparatorpermanent
This series of magnetic separators generally has a magnetic package angle of 160-175 degrees (special 180-200 degrees) with a high magnetic field. According to the beneficiation requirements, two magnetic cylinders can be designed for selection, and the specifications of the second selection for purification can be slightly smaller than the first. Many materials can be sorted, such as river sand, sea sand, iron ore, sand and soil ore, dry selection of fine powder materials, dry selection of tailings, dry selection of lean ore, etc.
Keywords: Dry magnetic separatormagneticselectionspecificationsmaterials
